This disk contains a LabVIEW library for the Pragmatic 2714A Arbitrary 
waveform generator and two files created by WaveWorksPro: Noise.csv and
Squine.csv and two files created by WaveWorksJr: PWM.csv and Gaussian.csv.
All four of these waveform files were exported from the WaveWorks 
programs as *.csv files.

Both WaveWorks programs are available from Pragmatic Instruments.

All of the *.csv files can be used by the Arb 1 and Arb 3 Application VI's to 
demonstrate how to download data files to the 2714A.  The Arb 1 application VI
also creates a plot of the data downloaded to the instrument on the front
panel of the VI. 

The Getting Started VI demonstrates how to download data from an array of data
generated within LabVIEW.

The Function Generator Application VI sets up the 2714A for the standard 
waveforms available on the 2714A.  As such this VI allows the creation of 
waveforms one could create using the front panel controls of the 2714A.

The Sequence Application VI creates a sequence waveform from the arbitrary
waveforms presently in the 2714A.

The standard function waveforms are available through the Function Generator
VI or by creating a Standard waveform file within WaveWorksJr and then 
downloading it directly to the 2714A or creating a *.csv file.
Once a *.csv has been created it can then be used by the Arb 1 and 3 
Application VI's to download a standard waveform as a arbitrary waveform 
for possible use in a sequence generator application.
The Gaussian.csv data file was created in this manner
